Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: Tmg on September 10, 2013,15:39:39
-
Hello
I have an LG 32LH3000
seems to have no sound or picture, the backlights are lit and the screen displays 2 horz lines on the display and when warm has a vertical wide set of lines but still no images,
I suspect the main pcb but very hesitant in replacing then having to do the firmware ect and ending up with a non working set, even though its useless atm...
Any help please
Regards
TG
-
hi whats the part number of the main and t con boards of your set? i am sure i have just parted one of these out for parts due to a smashed screen. can you post a picture of the tv showing the fault?
-
The main pcb is a EAX60686904 (2)
I am now going to replace this main board and report back if this cures the fault
The Horz lines are so faint it wont show on a camera, no sound either ?
Regards.
-
my main was eax60686902 (0) have you tried a factory reset to see if the sound comes back?
Hold MENU on TV and MENU on remote for 5~10 seconds, then select reset option.
-
Hi unfortunately I am unable to select any reset option because all i see on the screen is 2 white pinstripes going across these pin stripes seem to look as if there is picture information in them even with no aerial plugged in
-
HI
CHEK FLAT CABEL
MY BE THE PROBLEM PANEL
-
Hi
Do you have any sound if you connect an external input to the scarts?
Keith
-
Hello,
The LVDS lead has been checked both ends,
Inputting scart signals gives me exactly the same symptoms,
Currently waiting for a new main board to arrive and will report if this cures the fault
Regards
Tony.