Mulja tv repair portal

Equipment Repairs => CRT TV forum => Topic started by: g0rd0n on March 13, 2008,18:02:33

Title: ferguson ftv 28DFW5 TV not powering up fully.
Post by: g0rd0n on March 13, 2008,18:02:33

Hello.
         Iam hoping someone could possiblly point me to fault on set. Problem being, you turn set on, manually
          you here it powering up, it used to show stand bye light but no longer, dead screen, and you
           can here a  fast ticking noise at transformer just under centre of crt tube not very loud. And you
            hear a kind of ticking noise from speakers, about two a second, Board is a 11A5 45B5 anybody any ideas.  Be obliged
              to anyone for a bit of info.
                                                           Thank You
                                                                                 gordon.

Title: Re: ferguson ftv 28DFW5 TV not powering up fully.
Post by: mulja on March 13, 2008,19:18:30

This is chassis 11AK45
you can find some fault tips for this chassis

Check line output transistor he must be short circuit
and power supply clicking in protection mode
 :dirol: :dirol: