Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: call me al on September 14, 2013,05:50:58
-
looking for help with this stuck in standby only red light no fuses blown or no obious shorts on psu panel psu panel no dyp-42w3 no relays clicking power not reaching primary circuit as relay rl801s/rl802s not closing if all leads disconnected from psu panel there are no op voltages present is it a power supply problem or elswhere any help much appreciated
-
I think it is defective motherboard
-
i have one exactly the same, came in yesterday, havent had chance to look yet
-
Hi,
Is the standby voltage correct?
I had a PS42A457, with this fault, where this voltage was about 4.9v,
and was pulsing, and was the standby stage, smoothing capacitor,
(22ufd 450v I think).
Regards
-
thank you watteau, it worked for me ,saved a lot of head scratching
-
many thanks changed cap worked perfect cap ref cb801 22uf 450v :c017: