Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: ProDave on September 19, 2013,13:43:45

Title: 17PW26-3 rebuild
Post by: ProDave on September 19, 2013,13:43:45

I have a blown up 17PW26-3

Rather than just buy another, I fancy a component level repair.

Q813 and Q814 (the main chopper pair) both short circuit.

Am I likely to find IC830 that drives them also blown up?

It's marked as an FAN7711 though the schematic I have for this PSU gives it as a TNY2666

I guess what I'm asking is whether this sort of PSU has a habit of blowing everything when they go pop?

Title: Re: 17PW26-3 rebuild
Post by: clark97 on September 19, 2013,15:04:57

ohmsupplies.co.uk offer a repair kit for that fault, kit159 17.95 plus vat and delivery.

Title: Re: 17PW26-3 rebuild
Post by: sinclairtv on September 19, 2013,15:08:43

http://www.chsinteractive.co.uk/electrical-components/spares-television-audio-video/television-spares/kits-repair-modification-and-upgrade/vestel/17pw26-3-kit-psu-vestel-q813-q814-s-c.htm

Title: Re: 17PW26-3 rebuild
Post by: Keith on September 20, 2013,04:07:57

Hi,

Don't expect these kits to be a 100% fix! I have not yet had one where these kits would have fixed it, there are usually other faults too, or maybe I am just unlucky!

Keith

Title: Re: 17PW26-3 rebuild
Post by: ProDave on September 20, 2013,11:04:51

I'll have to shop around to see if I can get the parts individually cheaper than those repair kits.  I can get a second hand working board for £20

Title: Re: 17PW26-3 rebuild
Post by: sabre504 on September 24, 2013,12:44:11

 A 17PW26-4 will also work as a replacement

Title: Re: 17PW26-3 rebuild
Post by: EARLYBIRD on September 24, 2013,16:06:18

Hi Charles hyde do a brand new panel for £27-£33 depends which version you require if you have  a account. :051bye