Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: GP ELECTRO on April 06, 2008,14:39:26

Title: VESTEL 32MB22
Post by: GP ELECTRO on April 06, 2008,14:39:26

Hello my friends,
does anybody have maybe service manual for VESTEL 32MB22 chassis.For me is very important that the power supply board holds IC FAN7529 .There are boards without this IC,boards are similar but different.
Many thanks in advance for support and help.
Regards
Peter :clap: :clap: :clap:

Title: Re: VESTEL 32MB22
Post by: bucse_aurelian on April 07, 2008,12:12:28

Hello,here is 17MB22.

Title: Re: VESTEL 32MB22
Post by: GP ELECTRO on April 08, 2008,04:28:42

Dear Mr.bucse_aurelian

many thanks for sent SM but I have made error in my previous message .It is working about CHASSIS 17MB20
sorry for my writing fault.
So the problem is in power board .Data for this board are next :

17PW20.1 (010507)
TEHLiKELi!
CANLI BOLGE

Board contains chip IC802  FAN7529
IC807 VH33A(3525A)  and IC 806  DL321
For this power board I need  schematic diagram

Many thanks in advance
Regards
Peter

Title: Re: VESTEL 32MB22
Post by: bucse_aurelian on April 08, 2008,15:14:47

Hello! For this power board I have the schematic diagram with:
 IC802=IRF 7314 ;
 IC807=SG 2525A;
 IC806=TNY 266 .
I hope this will help you .
 Aurelian .

Title: Re: VESTEL 32MB22
Post by: Ohm Supplies on April 13, 2008,04:00:42

Hi

We are just in the process of putting together the Power Supply repair kit for this Power Board.
Please contact me direct enquiries@ohmsupplies.co.uk.

Regards
Michelle

Title: Re: VESTEL 32MB22
Post by: chappers on December 12, 2009,20:05:33

Has anyone obtained the Rev. 1 circuit diagram for this power suppply yet? The one that shows FAN7529 in position IC802? There are other changes to the board from Rev. 00 but all diagrams on the internet seem to be for Rev. 00.

Please let me know if you have found one. I've emailed Vestel but I doubt very much I'll get any help.

Title: Re: VESTEL 32MB22
Post by: sparky on December 13, 2009,03:28:14

hi
for quickness get new psu from charles hyde or wiltsgrove