Mulja tv repair portal
Service manuals & datasheets => LCD TV forum => Topic started by: chrissie jones on January 23, 2014,07:35:30
-
had this set in today..ladie said she went to plug hdmi lead in and now wont come out of standby...took back off checked all caps and diodes..even change the power board from a good working set,but still standby...anyone had this fault before..thanx chris..
-
Hi Chris
Hot plugging an HDMI cable can cause corruption of the HDMI eeprom or boot loader flash data. Reprogramming the IC's with a good file, but very unlikely to be available. Or replacement main board.
Keith
-
thanx keith