Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: kennyc on February 11, 2014,12:03:37

Title: bush 42 m1cfa
Post by: kennyc on February 11, 2014,12:03:37

Tv comes on with white background and message in the middle of screen saying "contact your local service centre " . Remote and side panels do nothing. Put this on site in November no luck just hoping somebody has had similar fault since .Bush make a 32 and a 26 inch model to. Have unplugged manual controls still same .. thanks

Title: Re: bush 42 m1cfa
Post by: jordan on February 11, 2014,13:01:45

Try with factory reset

Title: Re: bush 42 m1cfa
Post by: kennyc on February 12, 2014,04:51:11

Hi Jordan, Have tried to find out how to do a factory reset just like the samsungs but none of the controls on the remote work . Don't know if there is a sequence to push them in to get into the factory reset menu

Title: Re: bush 42 m1cfa
Post by: downunder on February 12, 2014,06:01:27

As a last resort, you could short out pins 5 and 6 of the eeprom, switch the tv on, then remove the short.
Reinitialises the eeprom and it's saved my bacon quite a few times.

Title: Re: bush 42 m1cfa
Post by: kennyc on February 12, 2014,11:30:27

Hi downunder ,Will try it suppose it is just the same as I do on the samsungs .Thanks

Title: Re: bush 42 m1cfa
Post by: downunder on February 12, 2014,15:38:44

Yep, same procedure as Samsungs. Nothing to lose now.