Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: kennyc on February 20, 2014,03:47:49

Title: panasonic ix-p50x50b
Post by: kennyc on February 20, 2014,03:47:49

Hi guys ,Have got this tv .No front light on it have checked all usual things but it seems to be a common fault . Everybody says just replace the power supply . Just asking if anybody has actually found the fault on the board . Have got 330 v on smoothing cap but no 5v output from power supply. thanks

Title: Re: panasonic ix-p50x50b
Post by: jordan on February 20, 2014,04:32:08

Chassis GPF15DE
Replace IC U-203 (TZS9EK097) on the foil side of the PSU.
http://www.notobsolete.co.uk/index.php?main_page=product_info&products_id=1209

Title: Re: panasonic ix-p50x50b
Post by: kennyc on February 20, 2014,05:09:33

Thanks Jordan ,New board is about £70. The ic is about £12 will buy one fit it and keep fingers crossed . Will let you know if it works . Once again thanks for your help

Title: Re: panasonic ix-p50x50b
Post by: downunder on February 20, 2014,05:16:05

Don't be too hasty to replace the power supply, the front LED is actually lit by the main board. However, Jordan gets the cigar. IC203 is a known problem. Only 8 pins so should be easily replaced.