Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: chrissie jones on February 27, 2014,10:38:58

Title: hitachi 32LD30U
Post by: chrissie jones on February 27, 2014,10:38:58

When switch on,set hose green.then flashing green and red constant.....help!!!!!

Title: Re: hitachi 32LD30U
Post by: sparky on February 27, 2014,18:17:55

The screen flashes or standby led and what have you checked  if any thing

Title: Re: hitachi 32LD30U
Post by: chrissie jones on February 28, 2014,03:38:41

Standby light flashes mate.

Title: Re: hitachi 32LD30U
Post by: sparky on February 28, 2014,06:02:45

Sounds like mainboard corrupt eeprom

Title: Re: hitachi 32LD30U
Post by: kennyc on February 28, 2014,07:53:33

Hi chrissie , Had a similar problem on a sanyo 32inch .  Complete picture would go green for 2 seconds then red then blue . If its the same there is a problem with the remote . You need a similar remote to free up the tv again once you have done that the old remote should still work 

Title: Re: hitachi 32LD30U
Post by: chrissie jones on February 28, 2014,08:40:41

How do I reset eeprom on this model tv please

Title: Re: hitachi 32LD30U
Post by: Keith on February 28, 2014,09:22:37

I am guessing this is a vestel chassis? 17MB35 ?

Hot plugging HDMI devices causes the HDMI switch to fail (U133) I think! Best to replace the main board.

Keith

Title: Re: hitachi 32LD30U
Post by: ANDRASONI on March 01, 2014,07:11:14

Try this:

Title: Re: hitachi 32LD30U
Post by: chrissie jones on March 01, 2014,11:39:25

Thanx for all your help men..but sparky was rite.....corrupt eeprom....Thanx sparky.