Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: zx81 on March 09, 2014,14:53:02
-
Can anyone point me in the right direction for a service manual and schematic for a Hitachi 37PD5200e?
Will be replacing the common 2 resistors r003 and r005 also q220 and q201 daughter boards look fine visually.
Thanks in advance.
zx81.
-
Chassis PW1
R-003 and R-005 all 10R/5W,Q-201 (2SK2843) also replace PC-001 (PC123) and check or replace C-007 (3,3uF/450V)
-
Chassis PW1
R-003 and R-005 all 10R/5W,Q-201 (2SK2843) also replace PC-001 (PC123) and check or replace C-007 (3,3uF/450V)
Thank you sir.
Much appreciate you reply
-
Chassis PW1
R-003 and R-005 all 10R/5W,Q-201 (2SK2843) also replace PC-001 (PC123) and check or replace C-007 (3,3uF/450V)
Hi Jordan I cannot locate c-007 on my revision of the board I have only found c001 could you help locate via picture attached?
May be I'm not looking at the correct locations on the board. I'm assuming it would be on the primary side?
-
C07 near the Q-02 (on base)
-
C07 near the Q-02 (on base)
Thanks Jordan,
Will look again in that area.
-
http://elektrotanya.com/hitachi_32-42pd5000_5100_5200_5300_42pma500e_37pd5200_55pma550e_55pd5200_cmp4214e_sm.pdf/download.html
-
http://elektrotanya.com/hitachi_32-42pd5000_5100_5200_5300_42pma500e_37pd5200_55pma550e_55pd5200_cmp4214e_sm.pdf/download.html
Thanks that will be very very helpful.
Much appreciate all your help and guidance.