Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: tammu on March 12, 2014,03:47:13
-
As soon as the power is applied, the green led starts blinking continuously. No remote control and any operational switch works.
:oops:
-
If the green LED keeps blinking after it's normal 8 to 10 blinks at power-on, you've got a faulty A-Board (main board).
-
True, The A board is faulty but is it possible to repair A board?
Thanks :c017:
-
A very complex board which I've never attempted to repair. Have always gone for replacement, but they're
very expensive.
-
:c017:
indeed it is too complicated to repair in spite of service manual and schematic.but after replacing eeprom ic,my set started working.
thanks
-
Good feedback, I'll have to remember that for next time I get one behaving thus.