Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: kykyx123 on April 17, 2014,11:17:24

Title: sanyo ce42ld81-b in burn in mode
Post by: kykyx123 on April 17, 2014,11:17:24

Hi there, i have a sanyo ce42ld81-b tv that keeps flashing red green and blue.  I've been told its in burn in mode and that I need a code for this.  Anyone help??

Title: Re: sanyo ce42ld81-b in burn in mode
Post by: sinclairtv on April 17, 2014,11:40:15

On the 32" Sanyos If I remember correctly, you push 'menu' on the remote so try that

Title: Re: sanyo ce42ld81-b in burn in mode
Post by: kykyx123 on April 17, 2014,11:54:22

I've tried that, still no joy

Title: Re: sanyo ce42ld81-b in burn in mode
Post by: jordan on April 17, 2014,12:17:44

I think this chassis 17MB22 or 17MBxx
Enter service mode:MENU 4725
1.check elkos C-836 and 837 all 1000uF/16V
2.Eeprom IC-403

Title: Re: sanyo ce42ld81-b in burn in mode
Post by: sparky on April 17, 2014,13:42:46

Hi had one same fault with tv on showing fault use remote switch to standby the switch back on fault cured
Got to have genuine remote
Dave

Title: Re: sanyo ce42ld81-b in burn in mode
Post by: downunder on April 18, 2014,05:59:35

Try this to restore the tv to normal. Be aware of which buttons to use wrt the TV panel or remote control.
Press and hold [MENU] on the TV and [RECALL/COLOUR SYS] button on remote to display the Dealer Mode
menu. Use [CH ^/v] on TV and select RESET in the menu. Press [VOL ^/v] on TV to start the reset. Press
[OK] on the remote to confirm the reset. When complete, press [MENU] on the TV to exit.

Title: Re: sanyo ce42ld81-b in burn in mode
Post by: watteau on May 01, 2014,09:21:42

Hi,
Here's the bulletin sent out for this effect.
Regards