Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: chrissie jones on May 14, 2014,05:30:50

Title: SANYO CE32LD33-B
Post by: chrissie jones on May 14, 2014,05:30:50

Had this set in today.little old ladies said it take about 10mis to come..on inspection all capacitors look ok in power supply.....it's a vestal power board.number on board is 17pw20..has anyone had this fault before..

Title: Re: SANYO CE32LD33-B
Post by: downunder on May 14, 2014,06:07:31

Hi CJ, let the unit cool down, then heat the power supply with a blow dryer. If it then starts ok, then almost certainly caps, even if they look OK. Standby-5V rail filters commonly cause this.

Title: Re: SANYO CE32LD33-B
Post by: chrissie jones on May 14, 2014,06:43:03

Thank oz

Title: Re: SANYO CE32LD33-B
Post by: sparky on May 14, 2014,06:55:05

Plenty of tips in database for this psu if you have time to check

Title: Re: SANYO CE32LD33-B
Post by: chrissie jones on May 14, 2014,07:26:07

Nice one sparky....lol

Title: Re: SANYO CE32LD33-B
Post by: t1412 on May 14, 2014,11:42:34

i'd check those caps again with an esr meter thanks

regards
shaun