Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: sinclairtv on May 20, 2014,12:03:52
-
Hi
Got the above set where the LED responds to the remote but set is otherwise dead. Voltages out of the PSU are okay. Could the AV board cause this. Looked for eeprom but couldn't see it.
UPDATE: On Ebay a full set of boards was advertised at £50 so I bought them and it didnt cure the fault. When I changed the X-sus board there was a brief flash and the set went off so Im assuming a screen problem and damaging the board