Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: tonyred on June 23, 2014,16:23:58

Title: PROBLEM WITH DAEWOO DLP-3212
Post by: tonyred on June 23, 2014,16:23:58

Good morning all,
i have a problem with a tv in the subject. When i connect the tv in the electric network, the red led on the tv still red. When i press the accension's button, the red led link. I have try to find the power supply diagram about this tv, but i don't had succesfully.
The power supply of this tv is DEP32-200B.
Anyone have an idea for solve this problem?

Thank you very much for the support.

I'm waiting for response.

Thank you and have a nice day all.

Title: Re: PROBLEM WITH DAEWOO DLP-3212
Post by: watteau on June 24, 2014,04:11:28

Hello,
I don't think you will find a schematic for the power-supply.
Are you sure it is the power-supply?
You could try resetting the memory IC, - short out pins 5, 6 of
this 8 pin device,  re-connect the mains supply, and remove the short
after the LED lights. This might work.
Regards

Title: Re: PROBLEM WITH DAEWOO DLP-3212
Post by: downunder on June 24, 2014,05:41:46

Hello Tonyred,
Service manual now uploaded to downloads area.Look in LCD Other makes.