Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: call me al on March 13, 2015,09:52:56

Title: hitachi 32ld6600
Post by: call me al on March 13, 2015,09:52:56

Hi all am struggling with this old hitachi 32ld6600 .stuck in standby red light on ,the power panel a 17pw15-8 have changedc877 and c878 alsoc878 c818 and ic807 still same any help much appreciated

Title: Re: hitachi 32ld6600
Post by: fix2003 on March 14, 2015,02:34:30

I found a good tip  disconnect source pin of Q837 on soft start of IC807.If  the set starts ok and  looks good . Then Q837 should be replaced to cure this problem.The fet is BSH103

also there is repair kit

Title: Re: hitachi 32ld6600
Post by: call me al on March 26, 2015,05:00:27

thanks for info will try