Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: ToeJoe on April 27, 2015,20:12:20

Title: SONY TV will not change the VOL or CH
Post by: ToeJoe on April 27, 2015,20:12:20

I have a SONY TV Model KDL40R350B that will not change the volume or the
channels by remote and you cannot change it in the TV ether.

I do not know what the problem is.

A few miniatures before you could change them both.
I unplugged the TV thought that that would work and plugged it back in still nothing changed.
I only had the TV since July of 2014.

Title: Re: SONY TV will not change the VOL or CH
Post by: downunder on April 28, 2015,05:19:51

Should not this TV be covered by manufacturer's warranty? 12 months, is it not?

Title: Re: SONY TV will not change the VOL or CH
Post by: michael first on April 28, 2015,18:05:06

Hi.ToeJoe
tv locked, so you should try to upgrade the software at the last version,but first you should unlock it trying to access the service menu(display-5-vol+-power);you will not succeed the first time but you have to repeat
again and again until the set reacts and enters the service menu.Have a good time.