Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: rebel-mc on May 30, 2008,23:42:59

Title: LOGIK LCXW32HD1 - STUCK IN STANDBY
Post by: rebel-mc on May 30, 2008,23:42:59

Hi All,
I have a Logik LCXW32HD1 stuck in standby (red led constantly on).  It's already had a psu from OHM supplies but still no joy.  I'm thinking it's a fault with main board. 

Any Ideas anyone?

Many Thanks for any help

Title: Re: LOGIK LCXW32HD1 - STUCK IN STANDBY
Post by: norman on May 31, 2008,06:48:19

Hi, The usual cause is TR20 which I think the primary goes open circuit. It tells you on the ohm supplies site the resistance readings for it. I don't know if they can supply it. Hope this helps. Norman :thumbup:

Title: Re: LOGIK LCXW32HD1 - STUCK IN STANDBY
Post by: Ohm Supplies on June 05, 2008,15:52:39

Hi

These can on the odd occason suffer from Scaler Board faults too.

You are welcome to send your other boards for testing.

Regards
Michelle

Title: Re: LOGIK LCXW32HD1 - STUCK IN STANDBY
Post by: rebel-mc on July 07, 2008,08:56:51

Does anyone no where I might get a mainboard for this model?

Any Help

Many thanks