Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: kennyc on July 30, 2015,14:04:58

Title: SANYO CE42FH08-B STAND BY LIGHT
Post by: kennyc on July 30, 2015,14:04:58

Hi Guys ,have got the TV it has 17PW26-4 power supply and a 17MB38-1 main board . Usual problem think power supply is Ok and main board faulty but not 100% sure . Had another power supply but its out of a 32 inch Tv but still didnt work when changed . Any check to make sure its the main board before buying another one on E-Bay

Title: Re: SANYO CE42FH08-B STAND BY LIGHT
Post by: fix2003 on July 31, 2015,02:34:50

check the 1.8v supply  to u123-the hdmi processor chip ic (an sil9185actu)
can some times get blown by "hot plugging" of HDMI connections. this drags down the 1.8 volts and causes all sorts of start up faults or stops set all together

Title: Re: SANYO CE42FH08-B STAND BY LIGHT
Post by: kennyc on August 07, 2015,07:48:49

Hi FIX2003,manged to get another power supply and it was still the same so must be the main board ,thanks for you help

Title: Re: SANYO CE42FH08-B STAND BY LIGHT
Post by: fix2003 on August 08, 2015,02:28:11

Quote from: kennyc on August 07, 2015,07:48:49

Hi FIX2003,manged to get another power supply and it was still the same so must be the main board ,thanks for you help

yes check on main board check the 1.8v supply  to u123-the hdmi processor chip ic (an sil9185actu)