Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: t1412 on August 18, 2015,07:38:23
-
afternoon fella's, I've had this Panasonic tx-32lxd60 come in dead, i'e no standby light, internal fuse by the powe switch ok, and fuse on the psu ok, 3,2 coming from main board , found q803 2sk2231 s/c, replace it tv came on bit of a buzz, from the psu, switch it off then back on same again, dead, what else do I need to change, thanks for your time
regards
shaun
-
Hi,
D804 also goes s/c with Q803
Regards
-
i'll check get back to you, thanks watteau
shaun
-
D804 is a 20V zener, type UDZSTE-1720B.
-
thanks downunder
shaun
-
ok guys replaced d804 and q803 but tv is still dead but thanks for the info, right got it to come on power flashing quick screen came up but soon as I switch it off and on again nothing dead
shaun :03:
-
Dead set no st/by led indication,no relay click
Cause: IC801 (F9222L) SMP control IC s/c between pins 8,10 & 11
Replacement rectifies
We have had several sets with the +24v relay RL850 going high resistance across the contacts, giving similar
symptoms.
These are from the panasonic forum the relay rl850 is mentioned several times
-
like to thank Watteau downunder oldtvman for the help with this fault, sorry fella's had to cheat in the end an order a replacement psu, change all the components you mentioned but didn't want to play, but all working now touch wood, thanks for your time
regards
shaun :93:
-
Hi Shaun,
That's OK, don't feel bad about it. Sometimes we have to bite the bullet.
Bruce