Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: Turnip on November 04, 2015,09:06:01
-
Hi Folks,
Have one in where after a reported power cut while set was working, it stopped. Plugged it in and found after a few seconds the LED backlights came on but with no picture or OSG.
Green led on main board initially flashed twice repeatedly then after a few minutes flashed three times continually.
Neither set buttons nor RCU have any effect - Any thoughts ? - Thanks - Chris.
-
Update firmware
-
Thanks Jordan,
Looking around for service manual and/or an eeprom, not found anything yet - Chris.
-
toshiba website has an update for this tv with instructions
-
Hi Cat,
Did as you suggested - Surprised at a 150Mb firmware download but it did the biz - Many thanks - Chris.