Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: thoma on June 19, 2017,09:39:59
-
Hello to all!
Have Panasonic TX-L37ETS51 LA35 Chassis with PSU TNPA 5583
The set is dead no std by led you can not switch on the Voltages from PSU are available!
need schematic and tips!A-Board defective?
regards thoma!
-
Hi thoma,
The standby LED is controlled by the A board. If you're happy that the power supply is OK, then it'll be the A board faulty.
Bruce
-
thank you!Change the A Board too expensive!mistake repairable on A Board?
regards thoma!
-
Not a service-friendly board. Never had any luck in repairing one and have no idea what would be causing the problem.
Bruce