Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: old tvman on September 28, 2017,05:17:06

Title: lg 50pz570t
Post by: old tvman on September 28, 2017,05:17:06

Screen lights up but with no video just a blank raster, I suspect the control board or the main av board to be faulty,has anyone had this problem with this model before? Is There an Auto Gen test for this control board?
thank you davy

Title: Re: lg 50pz570t
Post by: downunder on September 29, 2017,04:10:05

Hi Davy,
'
On the control board, you have a large chip. At about the 4 o'clock position WRT the centre of the chip, you'll see 2 holes in the pcb marked R51 and R52. These are the 2 points to short out for the auto pattern generator. Guess I don't need to tell you to remove the flexie between the control and main boards. I'll upload the service manual in case you have any jitters.           Bruce

Title: Re: lg 50pz570t
Post by: old tvman on September 29, 2017,16:12:59

cheers   bruce  will try that tomorrow.

Title: Re: lg 50pz570t
Post by: old tvman on October 05, 2017,05:36:36

Fitting the link produced the test pattern suggesting the main AV BOARD was faulty, 10 minutes in a hot oven cured the fault. :sign0098: :sign0098: davy.

Title: Re: lg 50pz570t
Post by: downunder on October 05, 2017,08:02:35

You nailed it, Davey. Still have the magic fingers, eh.

Bruce