Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: Turnip on October 07, 2017,11:07:04
-
Hi folks,
Have one in for an unspecified intermittent fault so replaced all the tact switches and left it to run for a while.
Occasionally signal goes with OSG message 'No Signal' but comes back after a while - Same on all channels.
Wonder if there's a known issue with the BN41-01165B SSB - Thanks - Chris.
-
Hi Chris,never had this fault but I'd begin with replacing the tuner.just a thought.
-
Hi Chris,
Maybe corrupt eeprom. Try a reset in the service mode or check the option settings against those in the service manual. Bruce
-
Hi Mike and Bruce,
Did a factory reset and set fine for a couple of days, but today, off again. Checked panels on the pile but didn't have anything with a similar tuner so off to Ebay to haggle for a SSB with all the same numbers as seems the SSB has a variety of options, even using the same screen.
Many thanks - Chris.
With the new panel the set did the same, so thought replace all the caps in the P/I. Same again but when I switched channel to BBC1, also using colour bars on Scart, the problem disappeared so guess caused by a crap signal from channel 37 that doesn't bother other sets.