Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: bonesy on November 08, 2017,08:34:08
-
Hi guy's,has anyone had a fault with no supply voltage at connector for back lights? there is voltage at supply diode which goes down after a few seconds,but nothing at the connector to screen. I've noticed that there are repair kits available for this fault on e-bay,very cheap .But they also seem to say,that psu may have failed due to some sort of goo across lighting connections!
I wondered if anyone else has had this,used a kit & cured fault? or if as suggested may be caused by the strip connections being poor.
-
Silly old man,always triple check,yes voltage on supply diode,for some reason lacquer on pins of back light plug socket,voltage rises from around 120 up to 190 plus volts & dies back,so most likely duff LED's. :beer: