Mulja tv repair portal

Equipment Repairs => Satellite and Freeview forum => Topic started by: Davy on April 16, 2018,13:47:22

Title: Panasonic TU-DSB30 problems
Post by: Davy on April 16, 2018,13:47:22

Had this Panny for quite a while now, did have problems three years back so I recapped the power supply using Panasonic HC type low ESR 105 deg. C. capacitors (I always uses these whenever possible).

The box worked flawless until recently.... it started with a temporary power cut when after awhile the colour would drift off with slight dot patterning, now it drops to standby with no remote LED activity.... leave it off a while and it back working again..... me thinks the CPU may well want a 'reflow'.

Anyone had this problem, no capacitors on main board by any chance I don't know about?

Dave

Title: Re: Panasonic TU-DSB30 problems
Post by: leeeroy on April 26, 2018,08:52:08

I have never faced with such problem but I have different problem in that it the picture freezes. I think this problem is connected with age of equipment.