Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: andi72 on January 14, 2020,17:09:51
-
Manufacturer: Philips
Type designation: 32PFS4132 / 12
Inverter: LED
Chassi: TPN17.1E
Short error description (2-3 words): Device no longer starts, only to be seen from time to time at Philips LOGO, probably Flash corrupt
My measuring devices ::
Analog / digital voltmeter
oscilloscope
Circuit diagram available ?:
Yes, as a PDF
Hello everybody,
I have a start problem with the TV. I once created a log via the service interface. It seems that something is wrong with the flash. I have also tried to install the software again via USB. But this doesn't work with the UPG file. Unfortunately, I don't find an "Upgrade_loader.pkg". Are there other ways to save the software?
Enclosed the log with and without a USB stick.
greetings
Andreas
-
hi ,have you made sure the usb stick has been formatted to flash 32 before putting any update files on as tv does not recognise other formats.then fit usb stick in tv before powering up,worth a double check first.also is model correct as can only find 32pft4132/
regards
astracat