Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: t1412 on October 11, 2020,08:15:49
-
Hi fella's had this sharp lc-40le821e come in, looked dead but noticed the white arrow on the front of the tv flashing twice a second, tried holding input and channel down but not working, do have 5volt 3.3v is bouncing around so thinking mainboard fault, thanks
regards
shaun
-
Hi Shaun,
Try holding Vol down and Ch up, then apply power. You may have to try multiple times. These are noted for backlight failure - perhaps it has exceeded 5 times backlight failure at which point the tv locks up. Bruce