Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: t1412 on November 23, 2021,07:11:51
-
Hi fella's got a panasonic TX-L42D25B 7 blink error code, it's saying mainboard, any other info would be great thanks
shaun
-
note found on web
Panasonic TXL42D25 Error 7
This one was not to difficult to diagnose but i thought i would share the info as it was interesting.
This LED back light TV would attempt to switch on with a brief flash of back light then the TV would shut down and give error code 7
the manual states error 7 is A or XW Board
My first thoughts were power supply but i removed the outputs to the LED's and the set ran with no back light sound etc
was fine.
as this was under warranty i did not investigate the panel any further but i assume one of the LED sections were O/C
This is my first LED back light failure and is one to look out for.
Anyone else had this kind of problem?
replacement screen cured the fault.
-
Very interesting, fix2003. A check of the service manual says that code 7 ia a Sub_3.3V_Sense_SOS, which would generally mean the Main (A Board). Granted the error codes are not always gospel but it would be easy enough for a person of Shaun's ability to test your solution.
Go Shaun the sheep - I'd be interested to know your findings. Bruce
-
Hi vince/brucie the screen does flash up for a second then off, starts flashing 7 error blink code thanks
shaun
-
massive thanks for the tech tip the backlight is the fault,
shaun
-
Well who would've thunk it - thanks for the feedback, Shaun.
Bruce