Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: 92 on February 23, 2009,10:17:39

Title: Philips 50PFP5332D/37
Post by: 92 on February 23, 2009,10:17:39

Philips 50PFP5332D/37, Please look at photo, 7 verticle lines on screen with some double imaging, color is off.  Any suggestions or tips would be helpful. Anyone with a repair manual on this model?

Title: Re: Philips 50PFP5332D/37
Post by: brian on February 23, 2009,12:47:21

Hi,
Go to Philips Consumer Support Website,
Enter model number,and look for software downloads,and you will find a firmware upgrade (using a memory stick)
That cures your fault!
Regards
Bri.

Title: Re: Philips 50PFP5332D/37
Post by: 92 on February 23, 2009,19:19:32

Hi Brian,
Thanks for the quick reply, unfortunaltely the software upgrade did not change anything. If you have any other suggestions I would greatly appreciate them.
Thanks,
PL

Title: Re: Philips 50PFP5332D/37
Post by: brian on February 24, 2009,10:29:53

Hi,
Strange one,According to philips tech. the software upgrade should resolve this problem! Has the set definately accepted the new software?
Should show version 0.1 01 .0.0
failing that, sorry but can,t suggest anything else. Maybe worth contacting Philips via consumer webpage.
Bri.

Title: Re: Philips 50PFP5332D/37
Post by: aoi3610 on March 25, 2009,20:01:58

If I had the set in I would first swap the Logic PCB.

Title: Re: Philips 50PFP5332D/37
Post by: 92 on April 08, 2009,09:14:20

Reglaced the W2 logic main board, The set works like new. Thanks aoi :clap:

Title: Re: Philips 50PFP5332D/37
Post by: Turnip on November 04, 2010,12:48:41

Hi M/A,

Aren't you supposed to try flog something  ?  - Chris