Mulja tv repair portal

Equipment Repairs => CRT TV forum => Topic started by: geomap on August 17, 2010,10:47:55

Title: Projection TV Convergence section troubleshooting
Post by: geomap on August 17, 2010,10:47:55

Hi

May you please help. I have worked on a couple of Rear Projection TVs with convergence problem. Usually, the replacement of the 2 ICs and maybe some burnt resistors & capacitors will solve the problem. I am having a problem with 2 Samsung Projection TVs. The ICs are heating up excessively and you can't adjust "BLUE". The supply voltages, components in the section are all measuring okay. What can be the problem.

Title: Re: Projection TV Convergence section troubleshooting
Post by: Turnip on September 15, 2010,12:17:22

Hi, Geomap,

Set models would be useful for those who mend 'em -

All the best Chris.

Title: Re: Projection TV Convergence section troubleshooting
Post by: tv john on September 22, 2010,03:28:09

If it's the model with 2 ic's in a horizontal position at the front of pcb it usually works ok after setup.
"   "     "     "       "    "  "    "  " vertical         "      up LHS of pcb you will require genuine ic's.
John.