Mulja tv repair portal

Equipment Repairs => CRT TV forum => Topic started by: Fergusson on February 17, 2012,07:30:30

Title: Ferguson Help
Post by: Fergusson on February 17, 2012,07:30:30

My tv repairer has fixed some faults that i wanted done but in the process  now has another problem where the sound and brightness goes from 0 to full with nothing inbetween .The set has had its battary replaced as part of the work  .It is  Ferguson Tx 51A3 .It is puzzeling him so i thought i would ask for help.

Title: Re: Ferguson Help
Post by: sparky on February 19, 2012,10:21:03

hi
you will have to go into service mode to set up
cannot remember the red,green,blue,or yellow
buttons to press in what order  sorry try and
find service manual
dave

Title: Re: Ferguson Help
Post by: Turnip on February 19, 2012,12:37:23

Hi,

Being a few days older than Sparky, I seem to recall the backup Nicad drooled down the vertical control panel LHS and corroded most everything beneath - perhaps a modern LCD could be an easier option and would save finding screen clips - Chris

Title: Re: Ferguson Help
Post by: dougc on February 26, 2012,17:21:53

Hi, Can't remember the colours but to enter menu . Coloured buttons from left to right 1>2>4>3. Hope this makes sense, Doug

Title: Re: Ferguson Help
Post by: In_Focus on March 01, 2012,14:50:47

No coloured buttons, 51A3 is pre Fastext.

To OP do the manual controls on the set work? it sounds like you have a memory problem, to store the settings you need to press the normalise store on the front of the set.

Title: Re: Ferguson Help
Post by: Keith on March 02, 2012,05:25:12

Hi,

Lots of info on the older TX chassis here http://www.highlandelectrix.fsnet.co.uk/tvs/FERG_TX.TV.html#TX10

TX100 is also there

Keith

Title: Re: Ferguson Help
Post by: ximike004 on March 19, 2012,21:28:30

I need your help.

Title: Re: Ferguson Help
Post by: Fergusson on March 23, 2012,17:33:20

Quote from: ximike004 on March 19, 2012,21:28:30

I need your help.

WHY ?

Title: Re: Ferguson Help
Post by: Restorer79 on March 24, 2012,04:12:56

Hi Ferguson: Look closer at the message, it's SPAM to advertise what they sell.

Andy

Title: Re: Ferguson Help
Post by: tv tony on March 26, 2012,06:33:56

shall we exterminate him, hes getting a pain in the ****

Title: Re: Ferguson Help
Post by: Restorer79 on March 26, 2012,15:24:37

Hi Tony: Sounds like an excellent idea to me.




Andy