Mulja tv repair portal
Automotive section => ECU Information => Topic started by: Ohm Supplies on March 29, 2008,14:45:22
-
My keyfob stopped working. We have replaced the battery but have been told we need to re-programme it.
How do we do this?
Thankyou in advance for any help.
Regards
Michelle
-
FORD Focus (Radio 3 Button) - Key Remote Programming
1. Switch Ignition On/Off (II/0) 4 times within 6 seconds until a sound is made.
2. Press any button on Remote until a sound is made.
3. To program additional Remotes, repeat after 2 seconds after the sound.
4. Turn Ignition On/Off to exit.
5. A maximum of 4 remotes can be programmed.
-
:clap:
Yipppeeeee thankyou so much :cheesy1:
Regards
Michelle :brinda:
I'm happy...can you tell? :loool:
-
FORD Focus (Radio 3 Button) - Key Remote Programming
1. Switch Ignition On/Off (II/0) 4 times within 6 seconds until a sound is made.
2. Press any button on Remote until a sound is made.
3. To program additional Remotes, repeat after 2 seconds after the sound.
4. Turn Ignition On/Off to exit.
5. A maximum of 4 remotes can be programmed.
I also forgot to mention that these keyfobs suffer with DJ's on the battery carriers. If the re-programming sequence does not work you can check to see if the RF transmitter is transmitting by making an antenna out of your oscilloscope prope and looking for activity when pressing the buttons, or pressing the buttons near a de-tuned radio and listening for activity.