Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: insomnia on February 04, 2014,07:58:33

Title: philips 42pf3320/10 problem
Post by: insomnia on February 04, 2014,07:58:33

hi have the above set was told it turned on sometimes and when it does it worked fine but when it doesnt if i connet main power 2 led light on psu relay click then it goes off i seen cap c8059 was bad changed also checked c8060 with esr it was good but changed anyway but set still has this problem anyone see it before thanks in advanced

Title: Re: philips 42pf3320/10 problem
Post by: jordan on February 04, 2014,09:09:20

Change SMD capacitor C-2508 and C-2053

Title: Re: philips 42pf3320/10 problem
Post by: insomnia on February 04, 2014,13:15:57

hi jordan and thanks for the reply i checked them caps and seem ok so when i add power to the set power supply come and off maybe 5 seconds then wont power up for maybe 15 min so what i did was i cleared eeprom in main board 25c16 and 25c32 to blank status hoping mcu would write to eeproms now what happen is it turn on stay for maybe 15 seconds back light seem to go on then turns off and repeats to restart and off etc is it possible eeprom is damaged or maybe i should clear only one chip

Title: Re: philips 42pf3320/10 problem
Post by: insomnia on February 06, 2014,06:03:39

were is this cap 2508 i had 2053 but cant find this one