Mulja tv repair portal

Equipment Repairs => Service Menu Codes => Topic started by: brianbelfast on July 14, 2014,18:43:37

Title: Logik lcxw37hd1
Post by: brianbelfast on July 14, 2014,18:43:37

Anyone know how to access service menu on this old thing ?  Any help much appreciated.

Title: Re: Logik lcxw37hd1
Post by: downunder on July 15, 2014,04:32:36

Try 7, 4 , 7, ENTER. This for Logik LCX27WN2, but may also apply to your model.

Title: Re: Logik lcxw37hd1
Post by: brianbelfast on July 15, 2014,09:32:47

No that didn't work unfortunately.  But thanks for the reply.   Looks like I'm stuck with this one.  Must be quite a rare set. I've never seen one before.   Seems like no-one else has either lol.   

Title: Re: Logik lcxw37hd1
Post by: brianbelfast on July 15, 2014,18:13:04

OK turns out that it's actually an AMOI LC37T1E.   To access service menu hold down source on the remote and switch on the set.   

Title: Re: Logik lcxw37hd1
Post by: Turnip on July 17, 2014,11:44:32

Hi brianbelfast,

Had it also listed as a 'Profilo Telra' which is worse than death to serious menders. Glad it isn't - Chris.

Title: Re: Logik lcxw37hd1
Post by: brianbelfast on July 18, 2014,02:52:33

Well then I guess you'll know how to initialise the freeview board.  Factory reset within the service menu only does the main board.