Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: yamada on February 14, 2015,07:27:34

Title: philips 50pfp5532d
Post by: yamada on February 14, 2015,07:27:34

Hi all need help in sorting out a philips 50pfp5532d that was giving to me by a friend as it would not swich on just had clicking relays when back was removed there was a few bulging caps on psu which is known fault with these tv's all was replaced and tv was back to live all works ok apart from the picture look's grainny on all inputs  bit like connection thru a Composite input i am new to plasma tv but could this be caused from the LJ41-05400A (Tcon board ) any advice would be helpful thanks

Title: Re: philips 50pfp5532d
Post by: michael first on August 10, 2015,06:09:12

Hello,after replacing the bulging caps you should measure and adjust the Va and Vs by means of the

potmeters on the PSU;the values are indicated on the label stuck on the panel itself.