Mulja tv repair portal

Service manuals & datasheets => DVD/VIDEO/Home Cinemas/Hi-Fi/Camcorders => Topic started by: videoman on February 22, 2015,10:07:48

Title: pANASONIC DMR-EZ47
Post by: videoman on February 22, 2015,10:07:48

 :sign0085: Hi does any body have the DVD and digital interface used in the Panasonic DMR-EZ47;part number RFKNEZ47VEB for sale and if so what price please?

Title: Re: pANASONIC DMR-EZ47
Post by: Turnip on February 22, 2015,11:35:01

Hi Videoman,

Have one in for U61 issues - If cust says dump, will contact. Might well be a similar problem though - Chris.

Title: Re: pANASONIC DMR-EZ47
Post by: videoman on February 24, 2015,09:52:01

Many thanks for your reply My went down with the laser and as I understand via Panasonic the DVD mech should be replaced complete with the Digi board together.If the unit becomes available please advise me of the total cost?
Regards
Allan

Title: Re: pANASONIC DMR-EZ47
Post by: downunder on February 24, 2015,14:26:17

Hi Allan,

That's what Panasonic say, because the digital  module holds the software for the dvd loader, but many's the time I've replaced just the loader, sometimes from a different Panasonic model, with no ill effect. There may be slightly different software versions for a particular model, but let's face it, they're mass produced. However, if you feel that the pcb needs to be replaced, by all means do so.       Bruce.

Title: Re: pANASONIC DMR-EZ47
Post by: Turnip on February 26, 2015,13:02:20

Hi Allen,

Cust collected it today as it still records/plays tapes. Guess problem was DVD loader as Bruce suggests.

Glad I bought a Toshiba - admit no VCR but a good DVD mech and hard drive.

Use an old LG combi for conversions - confess the mode switch cocks up every year or so, so gets a squirt that seems to sort it for a while  - Chris.

10/4/15 Cust brought it back again as DVB board has died, as they do - still plays tapes though.