Mulja tv repair portal
Equipment Repairs => DVD/VIDEO/Home Cinemas/Hi-Fi/Mp3/Camcorder => Topic started by: Turnip on January 20, 2016,07:42:31
-
Hi folks,
Have one in where baseband video and sound OK but no HDMI output. Note there's a button on RCU to toggle between the two - Got caught out before as didn't realise, so not the problem this time.
Any thoughts ? - Thanks, Chris.
-
Hi Chris, Maybe the toggle switch on the remote called "Output Resolution". Bruce
-
Hi Bruce, and thanks for the manual,
Toggled that one too, still no HDMI of any kind. Note that Pioneer does a hefty (100 mb) up-grade to sort issues, but lack of HDMI doesn't seem to be one of them, so reluctant to burn a CD in case I lose baseband as well - Thanks again - Chris.
-
Hi Chris, have one of these with the same fault, know its a lot time ago,but if you can remember if you found the fault would you let me know, because I have not a clue at the moment.
Thanks Kelvin.
-
hi turnip
hdmi adjustment is in set up navigater menu ,worth a check.could also try a reset look for pinhole to do that
regards
astracat