Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: jose almeida tavares on February 21, 2016,11:50:26

Title: panasonic th-42pv8h led bliking 9x
Post by: jose almeida tavares on February 21, 2016,11:50:26

Hello, i need yo hepl for this tv. led blinking 9 x. thanks.

Title: Re: panasonic th-42pv8h led bliking 9x
Post by: jordan on February 21, 2016,14:20:55

chassis GPH11DE
http://elektrotanya.com/PANASONIC_TH-37PV8P_TH-37PX8B_TH-42PV8P_TH-42PX8B_TH-42PX8E_CHASSIS_GPH11DE.pdf/download.html

Title: Re: panasonic th-42pv8h led bliking 9x
Post by: downunder on February 21, 2016,18:56:56

Hello Jose,

A most unusual error code. Loss of communication between the System MPu and the Panel MPu. These ICs are both located on the A board so it's likely an A board fault. Possible that the SC board is throwing up a false code. It, and the SS board, should have a green LED on each which lights up if the boards are functional. If the LED does not light, chances are the A board is faulty.

Try this: Disconnect the SC from the p/supply and turn the set on. A normal tv will now give code 7. If still code 9, do the same for the SS board. Code 8 should result. If code 9 persists, go for the A board as faulty.

Bruce