Author Topic: Sony HCD-CL1 - CD Doesn't.  (Read 1483 times)

0 Members and 1 Guest are viewing this topic.

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Sony HCD-CL1 - CD Doesn't.
« on: May 24, 2016,11:02:08 »
Hi Folks,

Have one in where the motor that works the disc change mechanism was spinning it's drive belt. Replaced the belt to find motor ground to a stop. Had a good look as suspected a gear without a tooth or something jamming the mechanism - Found nothing.

Download the manual to discover it gives no clue about gear timing, though I hadn't disturbed any apart from the loading tray trying to get to the belt, and ran it without the tray - Still stuck.

Later discovered the belt can be replaced by removing 2 screws holding the rear panel with the disc check opto-couplers and lifting it out -  I'm still stuck though - Chris.

Mulja tv repair portal

Sony HCD-CL1 - CD Doesn't.
« on: May 24, 2016,11:02:08 »

downunder

  • Hero Member
  • *****
  • Posts: 1187
Re: Sony HCD-CL1 - CD Doesn't.
« Reply #1 on: May 25, 2016,03:47:25 »
Hi Chris,

Aye, know how you feel. I have nightmares about these things. The mecha timing for Sony is usually in a separate manual to the service manual.

I have the ones for the carousel types, but this is a cd stacker. Only one I have is for a different model, but it may be similar.             Bruce

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Re: Sony HCD-CL1 - CD Doesn't.
« Reply #2 on: May 25, 2016,10:44:08 »
Thanks Bruce,

Totally different of course. Tend to suspect CD deck repair on this model involves fitting a replacement, but being a 2001 model, no chance. Mind you, if I meet another, I know the quick way of replacing the belt, and save hours of unprofitable fiddling about when it doesn't work - Chris.

Mulja tv repair portal

Re: Sony HCD-CL1 - CD Doesn't.
« Reply #2 on: May 25, 2016,10:44:08 »

 

Powered by EzPortal
download
download
download