Author Topic: philips 40pft4509/12 dead  (Read 4358 times)

0 Members and 1 Guest are viewing this topic.

bonesy

  • Sr. Member
  • ****
  • Posts: 154
    • Email
philips 40pft4509/12 dead
« on: November 12, 2016,05:33:24 »
Hi guy's,I've got the above Philips lcd set,which appears dead.There's no st-by light.A bit of an odd set doesn't appear to have any customer controls on the tv at all,just a remote.I've removed the back & found that the always 12 volts is low at just under 9 volts,this appears to got off to signal board,but no sign of power up or st-by volts from signals board back to psu,I presume this is because the 12volt already being low,which ever regulator on signals board produces the 5 & 3.3 volts is not functioning.
The smoothing caps are rated at 450 volts & have around 358 volts sat on them. Just wondered if anyones seen one of these sets with power fault.

Database Error

Please try again. If you come back to this error screen, report the error to an administrator.
download
download
download
download