Author Topic: lg 50pz570t  (Read 196 times)

0 Members and 1 Guest are viewing this topic.

old tvman

  • Sr. Member
  • ****
  • Posts: 106
    • Email
lg 50pz570t
« on: September 28, 2017,05:17:06 »
Screen lights up but with no video just a blank raster, I suspect the control board or the main av board to be faulty,has anyone had this problem with this model before? Is There an Auto Gen test for this control board?
thank you davy

Mulja tv repair portal

lg 50pz570t
« on: September 28, 2017,05:17:06 »

downunder

  • Hero Member
  • *****
  • Posts: 828
Re: lg 50pz570t
« Reply #1 on: September 29, 2017,04:10:05 »

Hi Davy,
'
On the control board, you have a large chip. At about the 4 o'clock position WRT the centre of the chip, you'll see 2 holes in the pcb marked R51 and R52. These are the 2 points to short out for the auto pattern generator. Guess I don't need to tell you to remove the flexie between the control and main boards. I'll upload the service manual in case you have any jitters.           Bruce

old tvman

  • Sr. Member
  • ****
  • Posts: 106
    • Email
Re: lg 50pz570t
« Reply #2 on: September 29, 2017,16:12:59 »
cheers   bruce  will try that tomorrow.

Mulja tv repair portal

Re: lg 50pz570t
« Reply #2 on: September 29, 2017,16:12:59 »

old tvman

  • Sr. Member
  • ****
  • Posts: 106
    • Email
Re: lg 50pz570t
« Reply #3 on: October 05, 2017,05:36:36 »
Fitting the link produced the test pattern suggesting the main AV BOARD was faulty, 10 minutes in a hot oven cured the fault. :sign0098: :sign0098: davy.

downunder

  • Hero Member
  • *****
  • Posts: 828
Re: lg 50pz570t
« Reply #4 on: October 05, 2017,08:02:35 »

You nailed it, Davey. Still have the magic fingers, eh.

Bruce

 

Powered by EzPortal