Author Topic: Panasonic TX-P50GT30B - 7 Flash issue  (Read 382 times)

0 Members and 1 Guest are viewing this topic.

Turnip

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3390
    • Email
Panasonic TX-P50GT30B - 7 Flash issue
« on: March 08, 2018,06:15:30 »
Hi folks,

Got one in where the Y-Sus IGBTs are mostly S/C. Note a kit is available on Ebay but wonder if repair is viable due to other possible issues - Thanks for thoughts - Chris.

Mulja tv repair portal

Panasonic TX-P50GT30B - 7 Flash issue
« on: March 08, 2018,06:15:30 »

jordan

  • Hero Member
  • *****
  • Posts: 853
Re: Panasonic TX-P50GT30B - 7 Flash issue
« Reply #1 on: March 08, 2018,14:59:58 »
Use repair kit  KIT373
Greeting from Slovenia
Jordan Čebron

downunder

  • Hero Member
  • *****
  • Posts: 944
Re: Panasonic TX-P50GT30B - 7 Flash issue
« Reply #2 on: March 09, 2018,03:02:13 »

Hi Chris,

SC boards for these are as rare as rocking horse s$*t. Kit may be only option even if outcomes are a tad dubious.    Bruce

Mulja tv repair portal

Re: Panasonic TX-P50GT30B - 7 Flash issue
« Reply #2 on: March 09, 2018,03:02:13 »

Turnip

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3390
    • Email
Re: Panasonic TX-P50GT30B - 7 Flash issue
« Reply #3 on: March 09, 2018,10:24:09 »
Hi Bruce,

Thought go for it, if just for fun. Guess a personal learning curve as don't think Plasma will catch on, well, not with me as the buffers and screen are also possibly duff.

Great news with the Sammy edge-lit biz though - Just need suitable glue that likes heat - Chris.

Turnip

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3390
    • Email
Re: Panasonic TX-P50GT30B - 7 Flash issue
« Reply #4 on: March 13, 2018,09:48:53 »
Hi Bruce,

Went well - My second Pana Y-Sus, though initially confused as forgot to refit the flexy from the SSB as got tucked under the board and I didn't notice for a while.

Pleasant repair job as usually seems caused by sparking board earths and loose screws where Pana forgot that solder flows under pressure, but buffers don't seem to suffer.

Thanks again for the 'Heads Up' - Chris.

downunder

  • Hero Member
  • *****
  • Posts: 944
Re: Panasonic TX-P50GT30B - 7 Flash issue
« Reply #5 on: March 14, 2018,01:58:16 »

Hi Chris, Inspirational stuff. Thanks for the feedback.                          Bruce

Mulja tv repair portal

Re: Panasonic TX-P50GT30B - 7 Flash issue
« Reply #5 on: March 14, 2018,01:58:16 »

 

Powered by EzPortal