Author Topic: Philips 47PFL8404 H / 12, chassis Q548.1ELA  (Read 181 times)

0 Members and 1 Guest are viewing this topic.

saud52

  • Jr. Member
  • **
  • Posts: 19
Philips 47PFL8404 H / 12, chassis Q548.1ELA
« on: March 08, 2019,11:17:20 »
Hello everybody,

I have a Philips LCD TV model 47PFL8404 H / 12, chassis Q548.1ELA.
  My TV has the following problem: TV starts, in a fraction of a second gets a picture and a backlight. The image and the backlight go out immediately. After a few seconds the TV gets the picture again and loses it. So a few times at the start. After a few unsuccessful launches, the image and the backlight no longer come. My TV has a normal sound. Problem is in the power supply - inverter defective. ( „Delta“ DPS-298CP-A )
PSU checked, I've replaced all four of the high voltage capacitors at the output of the inverter transformers with new ones. I have also replaced IC702 = DDA003A and IC3 = DDA005, without success. I also checked the neon lights in the backlight in the panel. Everything is right. The TV still behaves the same way!
For suggestions, I would be grateful!
 :sign0085: :sign0085:

Mulja tv repair portal

Philips 47PFL8404 H / 12, chassis Q548.1ELA
« on: March 08, 2019,11:17:20 »

michael first

  • Sr. Member
  • ****
  • Posts: 191
    • Email
Re: Philips 47PFL8404 H / 12, chassis Q548.1ELA
« Reply #1 on: March 11, 2019,05:40:51 »
Hi.try to swap the SSB(main board) ,could work

Turnip

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3470
    • Email
Re: Philips 47PFL8404 H / 12, chassis Q548.1ELA
« Reply #2 on: March 11, 2019,12:33:58 »
Hi Saud52,

Tend to feel if the back lights stay on longer when warm, you have duff tubes, maybe a little Black at the ends. Not easy to check without replacement, as the inverter will suss the issue and cut drive - Chris.

Mulja tv repair portal

Re: Philips 47PFL8404 H / 12, chassis Q548.1ELA
« Reply #2 on: March 11, 2019,12:33:58 »

 

Powered by EzPortal