Author Topic: Philips Ambilight 55PUS7303/12. No Picture  (Read 3970 times)

0 Members and 1 Guest are viewing this topic.

Davy

  • Hero Member
  • *****
  • Posts: 302
Philips Ambilight 55PUS7303/12. No Picture
« on: September 09, 2021,12:23:42 »
The logo comes up for a couple of seconds then blank screen, picture can be seen with a torch and there's sound.

A spare LED strip was tried in place if the panel LED'sand that flashed ON and then  OFF. The leds are switched by a FET on the earthy side, the top side of the FET  there's voltage and drives the test strip.... so something is telling the lamp switch to turn off.

Would you cast eyes on the panel LED's or elsewhere, firmware, Tcon and suchlike - the Tcon fuse is OK.... the LEDs have zener diodes across each one.

Thanks Dave.
« Last Edit: September 09, 2021,12:29:06 by Davy »

Database Error

Please try again. If you come back to this error screen, report the error to an administrator.
download
download