Author Topic: Samsung lcd tv 40" broken  (Read 5965 times)

0 Members and 1 Guest are viewing this topic.

mykeie

  • Newbie
  • *
  • Posts: 3
    • Email
Samsung lcd tv 40" broken
« on: July 09, 2009,06:50:19 »
Hi there i have a samsung lcd tv model LE40M86Bd.  yesterday when the tv was on the picture started to flash on and off so i unplugged it and left if for a while when i turned it back on it was ok. i turned the tv off last night and this morning turned it on and the picture is flashing agian on and off and will not stop now. i have taken all the connected equipment out and just tried the tv only and still the same problem? can anyone tell me the fault and can i fix it myself?
thanks
mykeie

Mulja tv repair portal

Samsung lcd tv 40" broken
« on: July 09, 2009,06:50:19 »

mykeie

  • Newbie
  • *
  • Posts: 3
    • Email
Re: Samsung lcd tv 40" broken
« Reply #1 on: July 14, 2009,08:16:19 »
if nobody can help with the fault is there any where i can go to get an answer?
thanks

Contrast John

  • Sr. Member
  • ****
  • Posts: 127
    • Email
Re: Samsung lcd tv 40" broken
« Reply #2 on: July 14, 2009,11:35:34 »
Hi mykeie
This type of problem is usually caused by faulty electrolytic capacitors on the power board. The faulty ones usually have domed or split tops.
Regards
John.

Mulja tv repair portal

Re: Samsung lcd tv 40" broken
« Reply #2 on: July 14, 2009,11:35:34 »

mykeie

  • Newbie
  • *
  • Posts: 3
    • Email
Re: Samsung lcd tv 40" broken
« Reply #3 on: July 14, 2009,15:32:29 »
many thanks for the reply. what is the best way to repair this problem with the electrolytic capacitors on the power board and is it a simple fix?
thanks
mykeie

Contrast John

  • Sr. Member
  • ****
  • Posts: 127
    • Email
Re: Samsung lcd tv 40" broken
« Reply #4 on: July 14, 2009,17:31:32 »
Hi mykeie

The suspect capacitors are in one corner of the board and are usually 1000Mf 10Volt types. Remove the circuit board and de-solder them. Replace them with (solder in) 1000Mf 35Volt types observing correct polarity. Re-assemble and hopefully set should work.
Good Luck

John.

greymatter

  • Newbie
  • *
  • Posts: 2
    • Email
Re: Samsung lcd tv 40" broken
« Reply #5 on: July 17, 2009,16:22:59 »
It might also be an invertor breaking down, had the same symptom on my Haier and sure enough one invertor went open circuit and i was left with a one second flash of blue screen then nothing.

Mulja tv repair portal

Re: Samsung lcd tv 40" broken
« Reply #5 on: July 17, 2009,16:22:59 »

 

download
download
download