Techwood 32722HD LCD TV SOUND BUT NO PICTURE

[pollypeach52]

Hi, can anybody help please.I have a Techwood lcd tv that the picture has just gone off,there is still sound from the tv channels but the screen is blank.model No is 32722HD,32 INCH LCD TV.Be grateful for any suggestions,Thanks Dennis.

[davenjax]

hi dennis more than likely to be the inverter sometimes it will light up for about 1/2 secs then go out but could also be faulty caps in the psu ie bulging from the top rgds dave

[pollypeach52]

Hi Dave,
Thanks for the info,new to this,did a tv course umm 100 years ago,still had valves then.
There seems to be one cap with a raised head next to the two diodes (smoothing?)Could that be the problem?Would it be best to replace the psu board?best regards Dennis.

[menorcarob]

i have replaced the caps that are faulty and the board is fine, if you can test the caps and find them OC or diff value to spec can save lots of mooney

[davenjax]

hi you could change the faulty cap first but to be honest id say it was more than likely the inverter panel .i do have a few if you can get me the number i may be able to help .incase you were unsure the inverter is usualy a long line of tx's on the left side of the screen as you look with the back removed .pr could be 2 panels a master and slave either side let me know if you need any more help.dave

[Turnip]

Hi folks,

No-one has yet said what the panels are - Folks can seem to chat happily for ages without any useful input - Just a thought in hopes of some resolution and, time is pressing.

Now awful old, and might pass over B4 any repair - holding on, just fer this one (and for Sparky to make that needy pound, at last) - Chris.

[davenjax]

hey chris im about as in the dark as you are with this one but hopefully a panel number as requested will shine a light on our dark paths .dave

[pollypeach52]

Hi Dave,have changed the cap in the psu,still no joy,would like to try your next suggestion and try changing the inverter board.
Board No. SS1320WA16 0.6 one long panel that slots in on the right of the screen.Have you got one,remembering that Im a pensioner without a lot of the green stuff,thats why Im trying to repair it instead of throwing it in the bin and buying a new one.best regards Dennis.

[epi]

You got the code wrong, I think it's SS I320WA16 check at Jimmy's
http://www.shopjimmy.co.uk/catalogsearch/result/?q=I320wa16

Frank

[davenjax]

hi dennis i dont have one but if you go to ebay there are several from about 23.00 if you use ebay member  the 247enigma iv bought boards from him before always been good rgds dave

[pollypeach52]

Hi Dave,
Thanks will give ebay a try,cheers Dennis.

[Turnip]

Hi folks,

Note that no-one has yet admitted to any panel numbers or piccies.
 
Leave it to Davenjax and other youngsters - they have the time to train Turkeys

As a Norfolk chap - and after a famous local demise - have some doubts about eventual success - Chris.

[davenjax]

hi chris there is a panel number supplied in the last couple of threads not one i have come across before though .dave

[Turnip]

Hi Dave,

Noticed that afterwards - but no piccies - love piccies (LCD or Plasma - too old for anything else) - Chris

[davenjax]

hi chris find attached a download from ebay .dave