Author Topic: ALBA lcd32880H Df (Read 5822 times)

andt1968 · « **on:** February 22, 2011,16:31:39 »

Hi strange one this
Have power from leadgoing to the board but no power at all to TV no lights on front no nothing.
This must be the powerboard but where do i start could it be a fuse or bad cap?
Please help me

Mulja tv repair portal · « **on:** February 22, 2011,16:31:39 »

epi · « **Reply #1 on:** February 23, 2011,03:49:35 »

Is it a 17IPS10-3 power supply, have no schematic at the mo.
Check mains switch if fitted, mains fuse, and standby (always) 5V circuit, may be low faulty cap, or may not exist faulty smp IC.

Frank

Turnip · « **Reply #2 on:** February 23, 2011,13:04:41 »

Hi 1968,

Nothing listed here - send decent piccies of the works (from the back) - Chris.

Mulja tv repair portal · « **Reply #2 on:** February 23, 2011,13:04:41 »

Kilroys · « **Reply #3 on:** February 24, 2011,02:38:07 »

If a service manual could be to any help

Turnip · « **Reply #4 on:** February 24, 2011,08:20:12 »

Hi folks,

Have similar probs with 17IPS15-4 - Power to chopper chip but V/low secondary voltages. Note on several forums that this is a common prob.

All the best - Chris.

Mulja tv repair portal · « **Reply #4 on:** February 24, 2011,08:20:12 »

Mulja tv repair portal

News: