Author Topic: SHARP LC-32P50E standby problems (Read 9639 times)

chrissie jones · « **on:** January 03, 2012,05:33:20 »

at switch on standby light gose green then back to red with both sleep and standby light flashing..help

Mulja tv repair portal · « **on:** January 03, 2012,05:33:20 »

Turnip · « **Reply #1 on:** January 04, 2012,13:15:28 »

Hi C/J,

Isn't this an LCD tv problem ? - Chris

chrissie jones · « **Reply #2 on:** January 04, 2012,15:15:00 »

well yes!!!!

Mulja tv repair portal · « **Reply #2 on:** January 04, 2012,15:15:00 »

In_Focus · « **Reply #3 on:** January 04, 2012,15:45:53 »

Have you tried the usual Sharp trick of powering on keeping the Vol- and AV button held down? then pess P- & V- together to access K mode.
If the micro detects more than 6 backlight shutdowns it will not let the set start until the error buffer has been cleared.

The many opto couplers on the inverter are well known to give trouble on this chassis

sparky · « **Reply #4 on:** January 04, 2012,17:11:31 »

i tried to tell him look back at previous listing its all there
many have posted cure look
dave

chrissie jones · « **Reply #5 on:** January 05, 2012,03:20:29 »

many thanx focus.the best info saw far.ill give it a try...

Mulja tv repair portal · « **Reply #5 on:** January 05, 2012,03:20:29 »

Turnip · « **Reply #6 on:** January 06, 2012,12:55:18 »

Hi Sparky,

You too could be a moderator if you confuse everything but only in LOUD caps or lower case.

Voting - but nothing available, bit like Arab Spring with just one party - As a Humanist, bit doubtful of any gods, Tory or otherwise - Chris

Mulja tv repair portal · « **Reply #6 on:** January 06, 2012,12:55:18 »

Mulja tv repair portal

News: