Author Topic: Thomson DSI 8210CS Sky+ box  (Read 11765 times)

0 Members and 1 Guest are viewing this topic.

Andypandy18

  • Jr. Member
  • **
  • Posts: 26
Thomson DSI 8210CS Sky+ box
« on: December 14, 2012,09:24:09 »
Have two of these where no start up. LED flickers but stays in standby mode.  kept going straight into scart mode when trying to turn on with remote control. could not get normal tv mode unless scart unplugged.

caps that were bulged have all been replaced, Any ideas.
38v rail is down to 23v. even when unplugged from main pcb. is this some indication.

Mulja tv repair portal

Thomson DSI 8210CS Sky+ box
« on: December 14, 2012,09:24:09 »

jordan

  • Hero Member
  • *****
  • Posts: 896
Re: Thomson DSI 8210CS Sky+ box
« Reply #1 on: December 14, 2012,14:36:28 »
Check or change capacitors C-41(1200uF/16V),C-42(470uF/25V),C-51(1200uF/16V),C-14(100uF/400V)
Greeting from Slovenia
Jordan Čebron

Mulja tv repair portal

Re: Thomson DSI 8210CS Sky+ box
« Reply #1 on: December 14, 2012,14:36:28 »

 

Powered by EzPortal
download